Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code information

Condition





Note! This diagnostic trouble code applies only to ABS systems equipped with DSTC.

The control unit for the steering wheel angle sensor (SAS) transmits signals from the steering wheel angle sensor on the CAN net which the ABS control unit then receives. The ABS control unit compares the signal from the steering wheel angle sensor with the yaw-velocity signal. If the ABS control unit registers that the signals do not correspond, diagnostic trouble code ABS-00B7 is stored.

Substitute value
- Anti-spin function blocked.
- Stabilizing function blocked.

Possible source
- Disturbances in CAN.
- Internal fault in control unit for the steering wheel angle sensor (SAS).

Fault symptom[s]
- Anti-spin does not work.
- Stabilizing function not working.
- Anti-spin warning lamp is on.