Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code information

Condition





Note! This diagnostic trouble code applies only to ABS systems equipped with DSTC.

With the ignition on, the ABS control unit does a check of the system's signals to check that the signals are reasonable. If the ABS control unit registers that the quality of the signal from the steering wheel angle sensor (SAS) control unit is too poor, diagnostic trouble code ABS-00B5 is set.

Substitute value
- Anti-spin function blocked.
- Stabilizing function blocked.

Possible source
- Probably diagnostic trouble code set in steering wheel angle sensor (SAS) control unit.

Fault symptom[s]
- Anti-spin does not work.
- Stabilizing function not working.
- Anti-spin warning lamp is on.