Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code information

Condition





Note! This diagnostic trouble code applies only to ABS systems equipped with DSTC.

The steering wheel angle sensor (SAS) control unit transmits a signal on the CAN network. The ABS control unit receives the signal and compares it with the signal of the yaw-velocity sensor. If the ABS control unit registers that the signal from the steering wheel angle sensor is unreasonable, diagnostic trouble code ABS-00B3 is set.

Substitute value
- Anti-spin function blocked.
- Stabilizing function blocked.

Possible source
- Incorrect fore carriage adjustment.
- Incorrectly fitted steering wheel angle sensor.

Fault symptom[s]
- Anti-spin does not work.
- Stabilizing function not working.
- Anti-spin warning lamp is on.