Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition





Note! The diagnostic trouble code (DTC) applies only to ABS systems equipped with dynamic stability and traction control (DSTC).

The yaw rate sensor transmits a signal to the ABS control module. This signal indicates the extent and direction of yaw. Diagnostic trouble code (DTC) ABS-00A1 is stored if the control module registers that the signal from the yaw rate sensor is outside its permitted range.

Substitute value
- The anti-spin function is blocked.
- The stability function is blocked.

Possible source
- Open-circuit in the wiring.
- The wiring is short-circuited to ground or supply voltage.
- Loose yaw rate sensor.
- Defective yaw rate sensor.
- Defective control module.

Fault symptom[s]
- Anti-spin does not function.
- No stability function.
- Anti-spin warning lamp lit.