Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition




The control modules exchange information over a network via a standardized serial communication interface - CAN (Controller Area Network). Control modules transmit and receive information. The engine control module (ECM) transmits a torque signal over the network. The ABS control module uses this to regulate the anti-spin system. Diagnostic trouble code (DTC) ABS-0094 is stored if there is a fault in the torque signal.

Substitute value
- Anti-spin function disengaged.

Possible source
- Fault in engine management system.

Fault symptom[s]
- Anti-spin warning lamp lit.
- Anti-spin does not function.