Traction Control Module

Signal Specification, ABS / DSTC (Dynamic Stability And Traction Control) Control Module

Signal Specifications Table (Part 1 Of 4):

Signal Specifications Table (Part 2 Of 4):

Signal Specifications Table (Part 3 Of 4):

Signal Specifications Table (Part 4 Of 4):

All the values given are between the relevant terminal in column 1 and terminals #A15 or #A46 (ground), unless otherwise indicated in brackets.

Note: It is important that the breakout box is connected and that the ground terminals have been checked before readings are taken.

U = DC voltage in volts (V)
I = current in amperes (A)
f = Frequency in Hertz (Hz)
Ubat = battery voltage (V)
Ulow = voltage approximately O V