Torque Rod, Lower, Replacing

Torque Rod, Lower, Replacing

Removing the lower torque rod
Raise the car.

Remove







- the splash guard under the engine

Remove







- the torque rod from the transmission and sub-frame.

Installation

Installing the lower torque rod







- install the new torque rod
- Tighten the screws (A) to the transmission. Tighten to 35 Nm. Angle-tighten 40 degrees
- Tighten the nuts (B) to the sub-frame. Tighten to 65 Nm. Angle-tighten 60 degrees
- Tighten the nuts (C). Tighten to 35 Nm. Angle-tighten 90 degrees.