During Fault-Tracing/Repairs
During fault-tracing/repairs
Note! The soft-top must be lowered when the roll-over bars are activated.
Warning! When working on the ROPS system, the ignition must be switched off and the negative battery lead disconnected unless otherwise instructed. Follow the instructions carefully. To avoid unintentional deployment when working on the system, the roll-over bars must be activated using the VCT 2000 or manually according to Replacing the roll-over bar cassette Removal and Replacement replacing roll-over bar cassette. Great car must be taken to avoid personal injury; nobody is permitted to be in the vicinity of the roll-over bars when they are being activated using the VCT 2000.