Removal and Replacement

Replacing blower fan rheostat (MCC/STANDARD)

Replacing blower fan rheostat (MCC)

Removing blower fan rheostat (MCC)




- Ignition off.
- Remove glove compartment according to Interior, exterior Panel and SRS passenger airbag module Panel and SRS Passenger Airbag Module.
- Remove soundproofing panel according to Interior, exterior Dashboard Dashboard.
- Disconnect the blower fan rheostat connector.
- Remove blower resistor.

Installing blower fan rheostat (MCC)
In reverse order.

Finishing:
- Check that the blower fan is working.