End Mounting / Slide Rail

End mounting / Slide rail

Removing end mountings





Remove:
- The cover on the panel and the screw.
- The screw with the washer and the spacer.
Remove the seat belt from the slide rail.

Install:
In reverse order.

Removing the slide rail, front mounting




Set the seat height adjustment to its uppermost position.

Remove:
- the seat from the car according to Lifting mechanical seats in and out Lifting Mechanical Seats In and Out.
- the seat from the car according to Lifting the power seat in and out Lifting the Power Seat In and Out.
- the two screws from the inside of the seat frame.

Install:
In reverse order.