Internal Fault. Permanent Fault

Internal fault. Permanent fault

Checking the control module




- Ignition on.
- Read off the check sum and calculated check sum.
Check that the check sums correspond.
If they do not correspond there is an internal fault in the control module.









Are the values correct?

Yes - No Fault Found

No - Replacing the control module and programming

-------------------------------------------------

Replacing the control module and programming
The control module has registered an internal fault.

Caution! A new control module is delivered without software. The control module must be programmed in order to function after replacement.

For further information about programming and replacing the control module, see Replacing the gearbox control module (TCM) Replacing the Gearbox Control Module (TCM).





Continue - DONE

-------------------------------------------------