Fault In EPROM

Fault in EPROM

Erasing diagnostic trouble codes (DTCs)




- Ignition on.
Erase diagnostic trouble codes (DTCs).





Select "Continue" when this has been carried out.

Continue - Reading off diagnostic trouble codes (DTCs)

-------------------------------------------------

Reading off diagnostic trouble codes (DTCs)




- Ignition on.
Read off diagnostic trouble codes (DTCs).





Does GLA-114 recur?

Yes - Replacing component

No - Intermittent fault

-------------------------------------------------

Replacing component




- Ignition off.
Before replacing control module, see Programming parameters/functions Programming Parameters/Functions.
Try a new ECC control module according to Replacing the control module Replacing the Control Module.

Select "Continue" when complete.

Continue - FAULT FOUND

-------------------------------------------------

Intermittent fault
Check control module connector for loose connections according to Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults and contact resistance and oxidation according to Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults.





Continue - Fault-tracing information
No Fault Found

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
If the fault is intermittent, do not verify fault-tracing if the fault does not recur.
It is possible to view the information again, or leave fault-tracing for this diagnostic trouble code (DTC).

Do you want to view the information again?

Yes - Attempt New Test

No - FAULT FOUND

------------------------

Attempt New Test - Erasing diagnostic trouble codes (DTCs)

-------------------------------------------------