Checking Power Supply To CD-ROM Player

Checking power supply to CD-ROM player

Check, connectors and cables
Check the CD-ROM player connector for contact resistance and oxidation according to Checking wiring and terminals. Permanent fault Checking Wiring and Terminals. Permanent Fault.
Check the cable between the CD-ROM player terminal 16 and fuse 15, and the cable between CD-ROM player terminal 7 and fuse 30 for an open-circuit according to Checking wiring and terminals. Permanent fault Checking Wiring and Terminals. Permanent Fault.
Remedy as necessary.

Other information:
- To access/replace the CD-ROM player, see Replacing, CD-ROM player Removal and Replacement.
- For connecting breakout box, see Connecting the breakout box Connecting the Breakout Box.













Was a fault detected?

Yes - FAULT FOUND

No - No Fault Found

-------------------------------------------------