Crankshaft, Engine
MAIN BEARINGMain Bearing Journal Radial Runout (Maximum) 0.040 mm
Axial Play 0.08 - 0.19 mm
(Measured in the engine with the intermediate section tightened)
Main Bearing Journal Radial Runout 0.019 - 0.043 mm
BIG END JOURNALS
Diameter, standard (1) 50.000 + 0 / - 0.016
Bearing Recess Width 26.0 mm +/- 0.1 mm
Maximum Out-of-Round 0.004 mm
Maximum Taper 0.004 mm
(1) The variation in diameter for each bearing journal must not exceed 0.008 mm.
MAIN BEARING JOURNALS
Diameter, Standard (1) 65.000 + 0.003 /- 0.016 mm
Axial Bearing Width 26.00 + 0 / - 0.04 mm
Maximum Out-of-Round 0.004 mm
Maximum Taper 0.004 mm
(1) The variation in diameter for each bearing journal must not exceed 0.008 mm.