Replacement of Sips Bag In Front Seat

SIPS airbag

Preparations

Remove:

- battery negative terminal.
- the backrest upholstery according to Backrest upholstery Service and Repair

Removing the front seat SIPS airbag

Fold out and remove the protective pad on the side of the seat that contains the SIPS airbag.

Remove:






- the two screws that hold the SIPS airbag to the inside of the backrest frame.
- tie straps.
- steel clip.






Disconnect the connector clip.
Cut the tie strap.
Expose the wiring.
Replace the SIPS airbag.

Installation

Install:

In reverse order.

Tighten the SIPS airbag screws to: 6�Nm.