With Manufacturer's Scan Tool

Erasing Diagnostic Trouble Codes (DTCs)

NOTE: To obtain the correct communication with the control module during the procedure the instructions concerning the ignition switch position must be followed.






Before erasing Diagnostic Trouble Codes (DTCs) all indicated faults must be corrected.

NOTE: VCT 2000 connected to data link connector (DLC) and VIDA PC


- Reinstall all components, reconnect all connectors.
- Ignition on.
- Erase Diagnostic Trouble Codes (DTCs).

Select 1 to erase.
Select 2 to interrupt erasing.