Rear
Rear Brake Rotor DimensionsAll brake rotors have a discard dimension cast into them. This is a wear dimension and not a refinish dimension. Any rotor which does not meet this specification should be replaced.
| Alternative 2 AWD Alternative 2 is aplicable to All Wheel Drive (AWD) vehicles built up to and including week 49 of 1998. The brake rotor is manufactured by Lucus. | Outer Diameter | 283.0 | |
| Thickness New | 10.0 | ||
| Minimum Thickness | 8.0 | ||
| Max Thickness Variation | 0.008 | ||
| Maximum Runout | Loose Disc | 0.040 | |
| Mounted on Hub | 0.060 | ||
| Alternative 3 AWD Alternative 3 is aplicable to All Wheel Drive (AWD) vehicles built from and including week 50 of 1998. The brake rotor is manufactured by Teves. | Outer Diameter | 288.0 | |
| Thickness New | 12.0 | ||
| Minimum Thickness | 10.0 | ||
| Max Thickness Variation | Loose Disc | 0.035 | |
| Mounted on Hub | 0.040 |