System Description

System description





The brake system, with integrated EBD function, has undergone major changes compared with the previous models. The type designation is ABS Mark 20, manufactured by ITT (TEVES). The most important changes are:
^ Diagonally split circuit brakes (LF+RR, RF+LR).
^ Each wheel is individually controlled.
^ New master brake cylinder (equal amounts of brake fluid in both circuits).
^ Servo cylinder with pedal position sensor (The sensor is connected to the engine control module (ECM)).
^ Hydraulic unit (two valves have been added to certain variants)
^ New wheel speed sensors (Active sensors).
^ The control module, connected to the network.
The system can be complemented with a stability and traction control, Traction control alternatively STC. Car/variant/market dependent, standard/option. Common components for different car projects.