Verification

Verification







HINT: After carrying out the repair, check that the fault has been remedied.

- Ignition off.
- Reinstall connectors, components etc.
- Raise car so that drive wheels are unimpeded.
- Start the engine and let it idle.
- Gear selector in position D so the front wheels start to rotate.
- Read off the transmission speed.

Depress the accelerator pedal (AP) and check that engine speed (RPM) is updated

Is engine speed (RPM) updated?

YES: Refer to Trouble Code Descriptions. Diagnostic Trouble Code Descriptions
NO: Refer to Fault-Tracing Information - Permanent Fault. Fault-Tracing Information - Permanent Fault