7. Verification

Verification







HINT: After carrying out the repair check that the fault has been remedied.

- Ignition off.
- Reconnect components, connectors etc.
- Ignition on.
- Read off gear-shift position sensor position.

Move the gear selector to all shift positions a number of times, and repeatedly select the same position to check the operation of the gear-shift position sensor.

Are all values OK?

YES: Refer to Trouble Code Descriptions. Diagnostic Trouble Code Descriptions
NO: Refer to Fault-Tracing Information - Permanent Fault. Fault-Tracing Information - Permanent Fault