Signal Missing. Intermittent Fault

Intermittent Fault







- Ignition off.

Check cable between control module #A51 and lock-up solenoid SL for an intermittent open-circuit according to Checking wiring and terminals. Intermittent faults.

Remedy as necessary.

Other Information:
- To connect the breakout box, see Connecting breakout box, Transmission control module (TCM).
- To disconnect transmission connector, see Inspecting/cable harness to solenoids.
- For information about signals, see Signal specification, Transmission control module (TCM).

Select Continue when the fault has been remedied.

Continue: Refer to Fault-Tracing Information - Intermittent Fault. Fault-Tracing Information - Intermittent Fault