6. Verification

Verification







HINT: After carrying out the repair, check that the fault has been remedied.

- Gear selector in position P.
- Start the car.
- Read off the current through the solenoid circuit.
- Depress the accelerator pedal (AP) slowly.

The current should decrease as the accelerator pedal (AP) is depressed.

Does the current reduce when the accelerator pedal (AP) is depressed?

YES: Refer to Trouble Code Descriptions. Diagnostic Trouble Code Descriptions
NO: Refer to Fault-Tracing Information - Permanent Fault. Fault-Tracing Information - Permanent Fault