3. Checking Resistance In Solenoid S1 and S2 Circuits

Checking Resistance In Solenoid S1 And S2 Circuits







- Ignition off.
- Disconnect control module according to Replacing the transmission control module (TCM).
- Connect breakout box according to Connecting breakout box, Transmission control module (TCM).

Connect an ohmmeter between breakout box:
#A50 (#A50) and #A53 (#A53), solenoid S1
#B8 (#A68) and #A53 (#A53), solenoid S2.

The ohmmeter should read 12-18 Ohms.

OK: Refer to Replacing Transmission. 4. Replacing Transmission
NOT OK: Refer to Checking For Contact Resistance and Oxidation. 6. Checking For Contact Resistance and Oxidation