Checking Wiring and Connectors

Checking Wiring And Connectors







Check the 4-pin connector A for contact resistance and oxidation in accordance with Checking wiring and terminals - Intermittent faults.
Check the 24/14 connector (engine compartment harness-left threshold plate harness) for contact resistance and oxidation in accordance with Checking wiring and terminals - Intermittent faults. See Section 3(39) Wiring diagrams 850 for the model year in question. ZZZZZZZ
Check wiring between control module, position A:1 (green/red lead), and the battery positive terminal for intermittent open-circuit in accordance with Checking wiring and terminals - Intermittent faults.

Checking Wiring and Terminals