Checking Cables to Potentiometer 4

Checking Cables To Potentiometer 4






- Ignition off.
- Remove seat from car according to Replacing seat assembly.
- Disconnect the black 14-pin connector C.

Check that the brown cable is connected to C:14 and the red cable to C:8.

In the event of incorrect connection:
- Press out pins for C:14 and C:8. Use terminal removal tool Tools and Equipment
- Switch the two leads and press the pins into the connector.
- Reconnect the connector.

Were the leads connected properly?

OK - Replacing Component

Not OK - Verification