Checking Cables and Connectors

Checking Cables And Connectors







Check the gray 14-pin connector B on the control module and the connector on the potentiometer on motor 2 for loose connections according to Checking wiring and terminals - Intermittent faults and contact resistance and oxidation according to Checking wiring and terminals - Intermittent faults.
Check the blue/white power supply cable between the control module, terminal B:5, and the potentiometer on motor 2 for an intermittent open-circuit according to Checking wiring and terminals - Intermittent faults.
Check the white signal cable between the control module, terminal B:3, and the potentiometer on motor 2 for an intermittent short-circuit to ground according to Checking wiring and terminals - Intermittent faults.

Checking Wiring and Terminals