Checking Cables and Connectors
Checking Cables And Connectors
Check the black 14-pin connector C on the control module and the connector on the potentiometer on motor 1 for loose connections according to Checking wiring and terminals - Intermittent faults and contact resistance and oxidation according to Checking wiring and terminals - Intermittent faults.
Check the red power supply cable between the control module, terminal C:13, and the potentiometer on motor 1 for an intermittent open-circuit according to Checking wiring and terminals - Intermittent faults.
Check the yellow/red signal cable between the control module, terminal C:9, and the potentiometer on motor 1 for an intermittent open-circuit according to Checking wiring and terminals - Intermittent faults and an intermittent short-circuit to ground according to Checking wiring and terminals - Intermittent faults.
Checking Wiring and Terminals