Checking Cables and Connectors

Checking Cables And Connectors







Check the black 14-pin connector C and the connector on the potentiometer on motor 4 for loose connections according to Checking wiring and terminals - Intermittent faults and contact resistance and oxidation according to Checking wiring and terminals - Intermittent faults.
Check the ground lead between the control module, terminal C:14 (brown cable), and the potentiometer on motor 4 for an intermittent open-circuit according to Checking wiring and terminals - Intermittent faults.
Check the signal and power supply cables between the control module and the potentiometer on motor 4, terminal C:11 and C:8 for an intermittent short-circuit to supply voltage according to Checking wiring and terminals - Intermittent faults.

Checking Wiring and Terminals