Checking Cables to Potentiometer 2

Checking Cables To Potentiometer 2







- Ignition off.
- Remove seat from car according to Replacing seat assembly.
- Disconnect the gray 14-pin connector B.

Check that the blue/white cable is connected to B:5 and the yellow/white cable to B:4.

In the event of incorrect connection:
- Press out the pins to B:5 and B:4. Use terminal removal tool Tools and Equipment
- Switch the two leads and press the pins into the connector.
- Reconnect the connector.

Were the leads connected properly?

Yes - Replacing Component

No - Verification