Checking Connections on Leads

Checking Connections On Leads






- Ignition off,
- Remove seat from car according to Service and Repair - Procedures - Replacing seat assembly. Service and Repair

Check and correct incorrectly connected leads to motor 3 and to the potentiometer on motor 3. Refer to Diagrams - Electrical for the relevant model year for correct connection information. Electrical Diagrams

Switching connections:

- Press the pins out of connector C for the leads that are to be switched over. Use terminal removal tool Tools and Equipment
- Switch the leads and press the pins into the connector

Were there any problems with connection?

Yes - Verification

No - Checking Wiring For Short-Circuits