Intermittent Fault

Intermittent Fault







Check the cable between ignition switch #S and fuse 18, and fuse 18 and VGLA control module #B18 for an intermittent open-circuit according to Checking wiring and terminals - Intermittent faults. Check ignition switch terminal S and control module connector for loose connections according to Checking wiring and terminals. Intermittent faults, and contact resistance and oxidation according to Checking wiring and terminals - Intermittent faults.

Checking Wiring and Terminals - Intermittent Faults

Other information:
- For further information about signals and other values, see Control Module Pinout Values.
- To connect the breakout box, Reading and Clearing Diagnostic Trouble Codes