Checking Cables

Checking Cables







- Ignition off.

Check the cable between control module #A24 and roof light #5 for a short-circuit to supply voltage according to Checking wiring and terminals - Permanent faults and for open-circuits according to Checking wiring and terminals - Permanent faults.

Checking Wiring and Terminals - Permanent Faults

Other information:
- For further information about signals and other values, see Control Module Pinout Values.
- To connect the breakout box, Reading and Clearing Diagnostic Trouble Codes

Were any faults found in the cable?

Yes - Test complete

No - Replacing Component