Intermittent Fault

Intermittent Fault







Check the cable between VGLA control module terminal #17A and the tilt sensor for an intermittent short-circuit to ground according to. Checking wiring and terminals - Intermittent faults.

Check the cables between control module #A18 and driver's door central locking switch #C2, between control module #4 and driver's door central locking switch #C2, between control module #A16 and driver's door central locking switch #C4, between control module #A16 and passenger door central locking switch #C3 and between control module #A4 and passenger door central locking switch #C5 for an intermittent short-circuit to ground according to Checking wiring and terminals - Intermittent faults.

Checking Wiring and Terminals - Intermittent Faults

Other information:
- For further information about signals and other values, see Control Module Pinout Values.
- To connect the breakout box, Reading and Clearing Diagnostic Trouble Codes