Intermittent Fault

Intermittent Fault







Check the cable between control module #A25 and movement sensor connector #2 for an intermittent short-circuit to ground according to Checking wiring and terminals - Intermittent faults an intermittent short-circuit to supply voltage according to Checking wiring and terminals - Intermittent faults and an intermittent open-circuit according to Checking wiring and terminals - Intermittent faults. Check the cable between fuse 15 and ultrasonic sensor connector #6 for an intermittent open-circuit according to Checking wiring and terminals - Intermittent faults. Check the cable between ultrasonic sensor #7 and ground for an intermittent open-circuit according to Checking wiring and terminals - Intermittent faults.

Checking Wiring and Terminals - Intermittent Faults

Other information:
- For further information about signals and other values, see Control Module Pinout Values.
- To connect the breakout box, Reading and Clearing Diagnostic Trouble Codes