Faulty Signal - Permanent Fault

ECM-958F ACCELERATOR PEDAL (AP) POSITION SENSOR, FAULTY SIGNAL
FAULTY SIGNAL - PERMANENT FAULT

Replacing the throttle unit and programming



The throtthle unit has registered an internal fault. Registration has occured in the engine control module (ECM).

Caution! A new throttle unit is delivered without software. For the throttle unit to function after replacement, the throttle unit must be programmed.

For information about programming and replacing the throttle unit, Throttle Body (Electronic Throttle Module), Replacing


Fault-tracing information
Fault-tracing is not followed by verificatiohn for this fault.