Faulty Signal - Intermittent Fault

ECM-958F ACCELERATOR PEDAL (AP) POSITION SENSOR, FAULTY SIGNAL
FAULTY SIGNAL - INTERMITTENT FAULT

Checking wiring and connectors



Check accelerator pedal (AP) position sensor connector for loose connections according to [1][2]Checking Wiring and Terminals. Intermittent Faults

Other information
- To access/replace the accelerator pedal (AP) position sensor, Accelerator Pedal Module, Replacing
- For information about signals, see Diagnostic Parameters and Pinout Values. Signal Description, ME7, B5XX4T


Fault-tracing information
If the fault is intermittent, do not verify fault-tracing if the fault does not recur.