Faulty Signal - Permanent Fault

ECM-9300 CLUTCH PEDAL POSITION SENSOR, FAULTY SIGNAL
FAULTY SIGNAL - PERMANENT FAULT

Checking component and wiring



Check clutch pedal sensor resistance between # 2 and # 4, for resistance values see Component specifications. Specifications

Check clutch pedal sensor installation, search for damage and check connections visually Checking Wiring and Terminals. Permanent Fault

Remedy as necessary.

Other information:
- To connect the breakout box, Connecting the Breakout Box (ECM)
- For information about signals, see Diagnostic Parameters and Pinout Values. Signal Description, ME7, B5XX4T


Verification



Hint: After carrying out the repair, check that the fault has been remedied.

- Ignition off.
- Reinstall connectors, components etc.
- Ignition on.
- Read clutch pedal movement by pressing down and releasing clutch pedal.

The value is between 60-70% when the clutch pedal is unaffected and 10-20% when the clutch pedal is fully depressed.

Do the movements correspond?
Yes - Testing Complete.
No - Continue below.


Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed. Exit fault tracing for this diagnostic trouble code (DTC) or make another attempt.