Signal Too Low - Permanent Fault

ECM-928C CONTROL MODULE, COMMUNICATION PROBLEMS
SIGNAL TOO LOW - PERMANENT FAULT

Checking component and wiring



This Diagnostic Trouble Code (DTC) means that SET+ and SET- are both active at the same time.
Try a new cruise control lever.

Other information:
- To access/replace the cruise control lever, Cruise Control Lever/Turn Signal Indicator Switch, Replacing
- For information about signals, see Diagnostic Parameters and Pinout Values. Signal Description, ME7, B5XX4T


Fault-tracing information
Fault-tracing is not followed by verificatiohn for this fault.