Signal Too Low - Intermittent Fault

ECM-4020 FUEL TANK PRESSURE SENSOR
SIGNAL TOO LOW - INTERMITTENT FAULT

Checking cables



Check fuel tank pressure sensor connector for contact resistance and oxidation according to [1][2]Checking Wiring and Terminals. Intermittent Faults and loose connections according to [1][2]Checking Wiring and Terminals. Intermittent Faults Check particularly for any damage.

Check signal cable between control module # B31 (# B41) and fuel tank pressure sensor connector # 2 for an intermittent short-circuit to ground according to [1][2]Checking Wiring and Terminals. Intermittent Faults

Check power supply cable between control module # B10 (# B20) and fuel tank pressure sensor connector # 3 for an intermittent short-circuit to ground according to [1][2]Checking Wiring and Terminals. Intermittent Faults

Other information
- Connecting the breakout box/accessing the control module, Connecting the Breakout Box (ECM)
- For information about signals, see Diagnostic Parameters and Pinout Values. Signal Description, ME7, B5XX4T


Fault-tracing information
If the fault is intermittent, do not verify fault-tracing if the fault does not recur.