Checking Cables

Checking Cables






Check cable between ECC control module #B2 and engine control module (ECM) for an open-circuit according to Checking wiring and terminals - Permanent faults and a short-circuit to supply voltage according to Checking wiring and terminals - Permanent faults and for a short-circuit to ground according to Checking wiring and terminals - Permanent faults. Checking Wiring and Terminals

Also check cable between ECC control module #B2 and combined instrument panel combined instrument panel #A26 for a short-circuit to ground according to Checking wiring and terminals - Permanent faults and a short-circuit to ground according to Checking wiring and terminals - Permanent faults. Checking Wiring and Terminals

Remedy as necessary.

Other information:

- Connection of breakout box to ECC control module Connection of Breakout Box ECC
- The frequency on the coolant temperature signal varies with the temperature. For other values Connection of Breakout Box ECC

After performing this procedure Verification