Checking Components and Cables

Checking Components And Cables







Check passenger compartment temperature sensor resistance. For resistance values, see ECC electrical specifications. Specifications

Check cable between ECC control module #B6 and passenger compartment temperature sensor terminal 5 for a short-circuit to ground according to Checking wiring and terminals - Permanent faults.


Remedy as necessary.

Other information:
- To connect the breakout box, Connection of Breakout Box ECC
- The voltage on the signal cable varies with temperature. At 20 °C (68 °F) voltage should be approximately 2.5 V. For other values,

After performing this procedure Verification