Checking Signal Cable To Display

Checking signal cable to display

Check function




- Ignition on
Try to switch RTI system off with remote control.
The display should go out and fold down.









Is this function OK?

Yes - No Fault Found

No - Checking cables

-------------------------------------------------

Checking cables
Check cable between control module #A27 and display terminal 7 for a short-circuit to ground according to Checking wiring and terminals. Permanent fault Checking Wiring and Terminals. Permanent Fault.
Remedy as necessary.

Other information:
- To access/replace the control module, see Replacing the control module, old system Replacing the Control Module, Old System.
- To access/replace the display, see Replacing the display Replacing the Display.
- For connecting breakout box to control module, see Connecting the breakout box Connecting the Breakout Box.













-------------------------------------------------