Front

FA1 Removing:





Remove:
- nut, unscrew a few turns to protect the thread on the wiper mechanism spindle.
- wiper arm from wiper arm mechanism by supporting a pipe wrench on the nut and pressing off the arm.

Remove:
- nut.
- wiper arm.

FA2 Installing:

Installation:

Install:
- wiper arm.
- nut loosely.

Adjust position of wiper arm as shown. The dimensions in the image are given in mm (in).

Tighten nuts to 16 Nm (11.8 ft.lbs).

- Test windshield wiper function.