4. Flushing the Transmission

Flushing The Transmission
Apply the parking brake. Move the gear selector lever to position P.

Start the engine. Let the engine idle.

Switch the engine off when 2 liters of transmission fluid have been pumped out or when air bubbles become visible in the hose.

Fill with 2 liters of transmission fluid.

Repeat this 5 times.

NOTE: A total volume of 12 liters of transmission fluid should be used for this.

Start the engine again. Let the engine idle.

Check the color of the oil. When the color of the oil is clear red (as new oil), switch off the engine.

Connect the return line on the control system (the valve housing) cover.

Continue: Refer to 2.Checking and adjusting the oil level. 5. Checking and Adjusting the Oil Level