Test Drive Form, Description

Test Drive Form, description
This schedule is intended to provide guidelines when test driving a car to evaluate complaints about the AW 50-42 automatic transmission .
Please observe all speed limits .

Before the test drive:
- Check the oil level in the transmission before test driving. See Oil level, checking Checking Oil Level.
- Check that the gear selector cannot be moved when the ignition is off .
- Check that the gear selector cannot be moved with the ignition on and the brake pedal unaffected.

Test driving:
Check the operation of the park / neutral position (PNP) switch:
It should only be possible to start the engine when the gear selector is in Neutral or Park positions .
Try to start the engine with the gear selector in any other position than P or N .
Check the gear selector positions:
Check that the selector engages in each position, and that it does not try to " jump" out of the selected position.

Check the back-up (reverse) gear:
Back up the car in the normal way. Check that the back-up (reversing) light comes on.

Listen for mechanical noises:
Start the car with gear selector in position D . Drive the car so that the transmission shifts up and down. Listen for abnormal noises from the transmission. If you hear noises, stop the test drive and return to the workshop. Fault-trace the relevant symptoms in the symptom manager.

Check function of the transmission while driving

Economy mode, Sport mode
During normal driving the transmission uses the economy mode. The transmission shifts smoothly. At fast throttle opening, the transmission moves to the sport program. This provides quicker shifting. Check that the transmission is working correctly.
Start in position D . Note whether the gears slip or shifting is hard. Check that the lock-up function engages.
Keep the car stationary on a flat road with the gear selector in N position . Release the brake and accelerate a little. Does the car move forward?
Start in position 3. Drive until third gear engages. Release the accelerator pedal. Check that there is engine braking in 2nd and 3rd gears.
Start in position L . Speed up. Check that the shift from 1st to 2nd gear takes place. Then check the downshift from 2nd to 1st gear. Check that there is engine braking.
Stop the car on a slope. Shift the gear selector to position P . Release the brake. Does the car move?

Winter (W)
Start the car with gear selector in position D . The transmission should start in third gear and give a smooth take-up from standstill. Check that the kickdown function operates.