A-Post Micro-Switch

REPLACING THE SPRING AND/OR MICRO-SWITCH, A-POST

Note: Before starting work, see Preparations before work. Service and Repair

Removing the spring and/or micro-switch, A- post






Set the convertible top to the position illustrated.






Remove:
- the upper panel for the windshield member
- A-panel
- the screws for the lock housing
- the lock housing.

Note: Mark the position of the lock mounting before removing it.

Remove:
- the micro-switch (carefully press it outwards).
Tap out the pin.
Replace the spring, rocker and micro-switch.

Installing the spring and/or micro-switch
Install in reverse order.
Test the function of the lock in the A-post.