Brake Light Bulb: Service and Repair

Tail Light Cluster, Replacement

Location of the lights









The illustration shows the locations of the lights on the RH side. The LH side is the same but mirror-reversed.

The lights have the following functions:

- 1+4 = Parking light/Tail light
- 2 = Reversing light
- 3 = Fog light, LH side only (LHD cars)
- 5 = Direction indicator
- 6 = Brake light






Tail light, changing bulbs

Ignition off.
Open the cover in front of the tail light.
Undo the wing nut and take out the lamp holder.
Change the defective bulb.
Fit in reverse order.
* Check that all bulbs/lamps are intact and in working order.






Replacement of tail light cluster

Note! If a new tail light is to be fitted, the sleeves must be ground down 1.5 mm.

Open the cover in front of the tail light. Undo the panel partly in front of the tail light. Unplug the connector for the tail light. Undo the four nuts securing the tail light, see illustration.
Pull the tail light straight out. Fit in reverse order

Note! check the sealing and fit on reassembly.

* Check that all bulbs/lamps are intact and in working order.