Replacing the Electric Switch In the Tailgate Handle (2/4-Door)

Replacing the electric switch in the tailgate handle (2/4-door)

Removing the electric switch in the tailgate handle (2/4-door)





Remove:
- the handle.
- the cover for the switch
Set the switch to the up position. Disconnect the cable.
Remove the wiring from the solder. Note the position of the wiring.

Installing the electric switch in the tailgate handle (2/4-door)





Install:
- Solder the wiring into place.
- switch.
- the cover over the switch.
Note the locating pins holding the switch in place. Ensure that the cover is correctly positioned before installing.