Replacing the Spring And/Or Micro-Switch, A-Post

Replacing the spring and/or micro-switch, A-post

Note! Before starting work, see Preparations before work Preparations Before Work.

Replacing the spring and/or micro-switch, A-post

Removing the spring and/or micro-switch, A-post




Set the convertible top to the position illustrated.





Remove:
- the upper panel for the windshield member
- A-panel
- the screws for the lock housing
- the lock housing.

Note! Mark the position of the lock mounting before removing it.

Remove the micro-switch (carefully press it outwards).
Tap out the pin.
Replace the spring, rocker and micro-switch.

Installing the spring and/or micro-switch
Install in reverse order.
Test the function of the lock in the A-post.