General

General





Warning! SIPS airbag! Read the warning text for SIPS Airbag SIPS Airbag.

Power seats are available as factory fitted options. Both driver's and passenger seats are available.
Three different seat settings can be stored using the memory buttons.

Note! When replacing the control module, always check that the P/N of the control module is 9174904 (left seat) or 9174905 (right seat). Old version control modules have differences in diagnoses. These can operate the various seat functions correctly, but the diagnostic system will not be able to communicate to VCT-2000.

The control module located under the seat cushion controls four different motors. Three of the motors are positioned under the seat and the fourth is located in the backrest.
The control module with memory receives information about the position of the seat via signals from four position sensors. These consist of potentiometers which are driven by a worm gear on each motors' output shaft.